Search results for query: *

Hello C body people! I have a 68 Newport convertible, (with 15" rims not the stock 14"). I have the skosh chart and as a reference it lists driving style Camber Caster Granny -.25 degrees +1.5 degrees typ Perf street...

Hello, Looking for a 'good enough' or better front seat for a 55 Chrysler, can be Windsor, New Yorker, 300, Imperial. My current seat is too worn out. Looking for something usable a few rips ok, but worthy of sitting on. Color doesn't matter. (I already have a beat up one in need of...

Hello Mopar Enthusiasts! I'm attempting to wire the ignition for my current project, the 1955 300 clone, and could use a mental realignment on which wires go where. I'm going with what I'm familiar with, something similar to a 1968 Newport ignition, but not with points, rather an Orange Box...

Hi C-body fans!, I'm hoping the collective C-body brain can suggest a good source for heater (air-hoses), that are connected to the heater box. non A/C car. There are 2 x 2.375" id hoses and 1 x 4.375" x 7.875" oval hose. Thanks in advance, Mike

Hello, Looking for the headlight socket that holds the headlight. There are 2 sockets. An outer socket and inside the outer is a smaller aluminum inner socket. It is the inner socket that I am looking for. Please and thanks, Mike

Hello C body folks, Can anyone in the knowledge pool kindly direct me to a reliable source for these vinyl top clips? They are for a 68 Newport. Thanks and Happy motoring. Mike

Hello, I'm looking for the triangular plastic which holds the light. Driver's side (aka left). The one I have is black. I probably won't say no to a matching pair. Thanks & happy motoring.

Just an unsolicited update on a longer project - the Windsor to 300 clone project. Trying to keep it 'in the family' Mopar family that is, my next stunt is to try to add in 12V alternator and PS pump. Originally the car came with a 6V system, a combination 6V generator and power steering pump...

Hello Fellow Forward Lookers, I'm hoping someone can share the knowledge if they have it. I've been mincing along on my Windsor-300 clone project for about 5 years now. It was someone else's abandoned resto project that came in pieces. The only bumper frame bolt that wasn't blue-wrenched off is...

Hello C-body Fans, I stumbled upon this pic while pawing through FBM the other day. Fairly certain I've never seen a luggage rack on a slab era C-body. (wagons, yes - roof mount). Does anyone know if they made a factory option (non-aftermarket), for slab trunks? Shared wisdom appreciated...

Hello Fellow C Body Enthusiasts, Although I've tracked down 5 or so sources for inner and outer window whiskers, they all are 'out of stock' on the 68 Newport fastop option, (& verts for that matter).. I can get generic pieces, where I trim down the pieces and perhaps bend the rear units, but...

Hello Everyone, I'm looking for manual window (rear) both sides window regulators for a 1968 Newport. Thanks, Mike

Hello & Happy Spring. I'm trying to find a bucket seat trim (guard?) around the drivers seat, (the little chrome seat adjusting arm/nob) similar to the passenger side shown in the attached photo. Also, hunting for vinyl top chrome/stainless trim for same ride. Thanks and happy motoring.!!

Hello Mopar Fans, Looking for names of the rear seat styles for the three different styles in photos below all from 68 Newports. The teal and white has no 'notch' in the middle of the back seat, the grain is well... bucket-ish... from a hard top. I would like to use the front (split with arm...

Has anyone noticed some steering boxes do not fit? They look ok, holes sort of line up, but when you go to tighten them up to the frame, it gets pulled way out of position, and unusable without modification. The ones with a point on the south side, are correct. The "before" pic, in the car...

Hey Everybody, HISTORY: It started out as chasing down why my headlights don't work. The head lights initially (as received with Rupert) only worked on high beams only, leading me to start with the hi-low dimmer switch (on the floor). The wiring looks fine, and checking out the functionality...

I'm looking for strut rods for my 68 Newport. If anyone has a an extra set, I'm happy to turn them into cash. Thanks, Mike

Hello Chrysler Fans, Working on an original AC car, but I'm missing the AC line/hose from the compressor over the radiator to condenser coil. So, I do not have the fittings to add a new hose to, and am looking for a source where I can press a button and buy it complete. Any worthy sources...

Hello Fellow Mopar enthusiasts, Has anyone installed a rear anti-sway bar in a C-body? If so, would you kindly share a photo or 2 of how you mounted it to the frame? Thanks, Mike

Hello, I'm looking for a matching set of side view mirrors for my 68 Newport. Other years/models considered. thanks, Mike