Search results for query: *

Sorry hit post thread. Pics not uploaded

Okay this is a thread for power seat newcomers, like me. Power seat works fine. So I took out the 1973 front bench electric seat , mostly to clean and compare the seat vinyl between the front and the back seats. They are badly mismatched. So that my front seat could rest flat on a table, I took...

The upholstery shop estimates $1500 to reupholster seats, 72 Fury Coupe, Split front bench, rear standard bench. 2 month wait Is $1500 a decent price or a rip off? 2018 pic. Cheap vinyl is wearing off color in places and turning gray tint. Springs sticking out side of seat. Batting/foam is not...

If I found a 71 Fury door panel, electric windows, any recs on how I could change color to correct gold? Thanks, Ben

This is what happens when I get lucky. 1973 Rear seat belt retractor. Seat belt would not extend at all. Remove Retractable Seat Belt: 11/16 long socket, 3 ext, ½ R. Vise with towel: 1/8” bit, drill out aluminum rivets holding plastic cover on retractor housing. Remember orientation. Takes...

Is it Chrysler? What year, make, model does it fit? P#81638-SPO-J200 COVER L REC No Pentastar. Any Help appreciated!

I have the 1973 Dodge radio and air conditioning trim panel pictured below. It’s in good condition, except for the crack also pictured below. I have some JB Weld Plastic Weld that I was considering using to make the repair. I have read of people using fabric behind repair. 2 questions ·...

· The dash pad in my 1972 Fury is pretty ugly. It’s got big cracks in the pad material and needs to be recovered. I have not pulled the dash pad off the dash shell to inspect it closely, so this is a hypothetical question: · If I did decide to replace the dash pad for whatever...

I removed this bezel panel from my 1972 Fury today. The panel has some damage. Trying to decided whether to repair or replace. All these #s are on the back of the panel. Part number help request. Is it 3592052, 3592053, 3592054, 3592055. I think we can eliminate the latter 2 #s, because they...

I'm putting the dash back together for my 1970 Fury. I'm having trouble finding rubber stops for the glove box door. I tried Advance, NAPA, and AutoZone and struck out. Found these on ebay. Look about the same. Would they work? Or Does anyone have a part number/source for something that...

I have been using a die grinder and coarse discs to take my dash shell down to bare metal. I am planning on spray can prime & black paint. For filling small nicks and rust spots, what brand of primer do you recommend? The car is a driver. I am trying to hold down cost as much as possible...

I have the dash out of my 1970 Fury Conv. Main reason is to replace dash pad and repaint shell. But interior lighting also was a problem. If you’re having problems with your instrument panel flood lighting going dim or spontaneously even cutting off and you’re constantly trying to find the...

· 1970 Fury III Convertible with AC: I removed my AM radio because I had removed my dash assembly to replace the pad, repaint the shell, and go through the wiring. · Radio: when in the car, if the volume was turned almost all the way up, I could hear slight static. The antenna and...

What year were shoulder belts first available in a c-body Fury? thanks, Ben

I have a green padded dash in my 70 Fury Convertible now. It has major cracking and fade problems. I have a black padded dash shell that I plan to switch over to this Fall. The black padded dash is excellent overall, but has 2 small 1/2 inch wide punctures on top, one behind the VIN plate...