1970 Fury III.......The next chapter

['69FuryIIIConvertible]

51-2 truck? ford or mercury?

'51 F1, it's actually my bodymans truck, doing a bunch of mechanical stuff on it for him.

Cool project! I always wanted to convert my Imperial to a 4-speed manual but parts availability (and prices) have put me off.

Do you still have your 4-speed stuff?

I kept some of it, but let a lot of it go.

Mighty fine, Nick. Looking forward to following your progress.

Progress will be slow, but that's life.

That's my boy talkin there.

I found a pint of Hemi Orange buried in my paint cabinet that a friend had mixed back in 87 for his Superbird's U code, I checked it and it'll be perfect for this.

 

['69FuryIIIConvertible]

TRW slugs with LY Rods and ARP Hardware.

 

['69FuryIIIConvertible]

A friend @Mike66Chryslers sent me some pictures he took of my car when it still lived with Dave Wheeler's GT's, and a picture of the only time it saw the light of day in 2022.

 

['69FuryIIIConvertible]

Not much to report, just been picking at the 440 between other stuff, TRW 9.5:1 pistons, resized LY rods, with ARP studs, Clevite Bearings and Hastings piston rings, Made in the USA goodies

 

[65sporty]

How do you like that ring compressor? I bought one of those in a kit and have yet to use it

 

['69FuryIIIConvertible]

How do you like that ring compressor? I bought one of those in a kit and have yet to use it

It takes some getting used too and selecting the right size ring is a pain.

After you get it, it works well, it's nice that it's locking, this is a Matco set, but they don't make their own tools anyway.

 

['69FuryIIIConvertible]

Updates, because I've been slacking.....been assembling the 440...Comp cam, spec'd close to a street hemi, but with more overlap to build cylinder pressure, Melling double roller, Melling pickup and oil pump. NORS Mopar Performance flat tappet lifters, soaked and individually pumped up, Aerohead Indy 452 heads.

 

['69FuryIIIConvertible]

Moving forward....assembled the rockers and shafts, good used shafts I disassembled and cleaned/polished, new Melling rocker arms, I then primed the oiling system while rotating the crank shaft, and then assembled the intake and etc before priming it for paint.

A trip to National Moparts yielded me the correct '70 only valve covers, as well as all the plug holders and heat shields.

I got a lot of the other parts powder coated

 

['69FuryIIIConvertible]

Moving forward from there, I got the manifolds blasted and painted them, I know, not 100% OE, but it makes me happy.

I dug out the 30 year old paint my friend Duncan had mixed for his Super Birds U code 440, and had some mixed to match a spray card of it. Then I painted it, the photos don't do it justice, in person it's Hemi orange without a doubt...

I sourced the throttle bracket from the junkyard and sandblasted it before painting...

More to come this week as I keep moving forward...

 

[3175375]

Moving forward from there, I got the manifolds blasted and painted them, I know, not 100% OE, but it makes me happy.

I dug out the 30 year old paint my friend Duncan had mixed for his Super Birds U code 440, and had some mixed to match a spray card of it. Then I painted it, the photos don't do it justice, in person it's Hemi orange without a doubt...

I sourced the throttle bracket from the junkyard and sandblasted it before painting...

More to come this week as I keep moving forward...View attachment 662609View attachment 662610View attachment 662611View attachment 662612View attachment 662613View attachment 662614View attachment 662615View attachment 662616View attachment 662617

I like the whiteboard. I need to get a bigger one. Oh, and good work too!

 

[sixpkrt]

Nice work Nick. There's always that satisfying feeling when the engine comes together.

 

['69FuryIIIConvertible]

With the paint cured, it was time to start dressing the engine a bit....

For the colour, the first picture is the best I've been able to get it in a picture, for some reason it wants to photograph much more red then it is.

The colour is based on the Autopar Hemi orange, I did a spray card of it and what my friend gave me in the pint, so I kinda met in the middle and got a quart mixed in single stage, then I tweaked it a bit to meet my likings before spraying it.

I need to get a few brackets and a wire set and decide on a carb, then find where I put the air cleaner....

The distributor is a rebuilt I bought from Halifax Hops, the valve cover grommets are NOS, the drivers manifold and heat shield came from Dave Wheeler, the passenger manifold I bought at Carlisle in 2017, in all, I first began collecting parts to build this engine in 2014...

Nick

 

[3175375]

With the paint cured, it was time to start dressing the engine a bit....

For the colour, the first picture is the best I've been able to get it in a picture, for some reason it wants to photograph much more red then it is.

The colour is based on the Autopar Hemi orange, I did a spray card of it and what my friend gave me in the pint, so I kinda met in the middle and got a quart mixed in single stage, then I tweaked it a bit to meet my likings before spraying it.

I need to get a few brackets and a wire set and decide on a carb, then find where I put the air cleaner....

The distributor is a rebuilt I bought from Halifax Hops, the valve cover grommets are NOS, the drivers manifold and heat shield came from Dave Wheeler, the passenger manifold I bought at Carlisle in 2017, in all, I first began collecting parts to build this engine in 2014...

Nick

View attachment 663011

View attachment 663012

View attachment 663013

View attachment 663014

View attachment 663015

View attachment 663016

View attachment 663017

Looking fabulous!

 

['69FuryIIIConvertible]

A friend sent me some pictures a while ago that he took at Dave's shop years ago. The blue car is Dave's T code B5 GT he parted to restore the B7 V code, it also backed up my theory my car had a vinyl top added at some point and showed me what was once on my trunk lid....

I met up with one of our members @67valiant 100 on Saturday at Empire dragway in beautiful Leicester, NY and picked up a a stub he had for me thats much better then what's in my car, as some remember, that was basically the worst part of this car and the only rot underneath it.

 

[65sporty]

The engine looks great

 

[67valiant 100]

You can thank @Bill fury for the stub! I just passed it on haha.

 

['69FuryIIIConvertible]

You can thank @Bill fury for the stub! I just passed it on haha.

You guys both helped me out huge and in the process got another Fury on the road.