For Sale 1971 Chrysler 300 parts-going to Carlisle?

Status
Not open for further replies.

MOVE N UP

Well-Known Member
Joined
Apr 25, 2015
Messages
654
Reaction score
2,161
Location
Maine
Feedback: 1 / 0 / 0
Contact seller
3112AC72-F646-4471-A96C-5953F69EC0C6.jpeg
3AC0E1B9-4786-45F4-ADCA-6C1DF921AC9D.jpeg
1FD30CA7-7F21-4F52-9232-1A7970F4AFE9.jpeg
29B653EA-002B-45B3-9498-C7D3EC118DA8.jpeg
74D90DCC-400A-4B81-8054-C0E1F3BBEA15.jpeg
F7BD37E7-E6E6-433A-8E70-4CF788DA5424.jpeg
9FB8721D-B376-44ED-B894-8E2D6ACB55CC.jpeg
87801DF7-202A-451D-B4AA-2D619017C390.jpeg
1971 Chrysler 300 parts
Grille $150
Headlight door assemblies $75 each
Grille end caps $25 each
Complete grille package $300

All prices do not include shipping from Buxton Maine
I can deliver to Carlisle for free if paid for in advance

4AFC4DF2-80C7-4448-9832-C0D9D00317A8.jpeg
 
Last edited:
Maybe you could tell us more about these parts.

They seem to be used but the photos are taken from a distance such that it is hard to tell if there is visible pitting up close and whether the black areas have been touched up or???????

Or maybe you could describe their condition on a scale of 1 - 10 with a 10 being properly preserved NOS.

Without more detail it is hard to tell what we are looking at................................................and for a potential buyer to know what they are worth to them..................

Thanks
 
The priced accordingly- used parts have been out of weather/ sunlight for nearly 25 years. There is minor pitting on the taillight bezels and some minor pits on the headlight doors. The TL bezels have been repainted-and the HL doors have been touched up.
 
I'm looking for the 'THREE HUNDRED' emblems that go on the front fenders
 
I know the taillights are different than those on my '70. Could those lenses be "dropped in" to my bumper, and work fine, or did they also change the bulb spacing / positioning?

Mine are broken and cracked. Thought about installing some '71's for the time being, until I can (hopefully) find a decent pair of '70's.
 
I know the taillights are different than those on my '70. Could those lenses be "dropped in" to my bumper, and work fine, or did they also change the bulb spacing / positioning?

Mine are broken and cracked. Thought about installing some '71's for the time being, until I can (hopefully) find a decent pair of '70's.

The red lenses are identical between 1970 and 1971 models and the housings are as well. For 1971 all that changed was Chrysler added an overlay of the lenses to change the look of the rear end a little.
 
The red lenses are identical between 1970 and 1971 models and the housings are as well. For 1971 all that changed was Chrysler added an overlay of the lenses to change the look of the rear end a little.

Well there's my one learned thing for the day.
 
The red lenses are identical between 1970 and 1971 models and the housings are as well. For 1971 all that changed was Chrysler added an overlay of the lenses to change the look of the rear end a little.

So you're saying I could remove the overlay without destroying the underlying lens? It's not glued on?
 
So you're saying I could remove the overlay without destroying the underlying lens? It's not glued on?

That is correct, as the overlay is held on by the same screws that the lens are, only maybe a little longer.
 
Status
Not open for further replies.
Back
Top