WANTED Any C Body part close enought to fit? B Body 1/4 window felt

[odcics2]

I need a pass side 1/4 window felt for the outside of a 68 to 70 Dodge 2 dr. B Body hardtop.
Pics below are of my outside driver side part in usable condition. It shows the style I need to find. Notice there is no stainless bead running along the top! It's all black.

Are there any C Body weatherstrips where I could trim it down to make it work?? My driver side is 25.5" long. I can bend the end & attach it to the 1/4 panel however necessary.

I have no reproduction parts on the car, so that's why I'm looking for an used, original part.

PM please, if you have a part that can help!

 

[C Body Bob]

I've got a 68 Fury 4 door I haven sold much from. I can check it. I'll be out there in the yard this weekend. Remind me Friday to look if you haven't found anything

 

[odcics2]

ok, will do. Thanks!

Would a low line 69 to 73 Plymouth or Dodge C body 2 door piece work?
Thinking the pass door is long enough. Just wondering if it has a stainless bead, or not. (I need without)

Any idea?

 

[330dTA]

Those Quarter window seals were pretty generic back in the day. For example my previous ’70 New Yorker 4d Hardtop had the same seal as many ’65-’72 A and B-bodies (Metro Seal VS 7-A/FL). In fact it was only listed for A and B-bodies.

I suggest you take a look at the Metro Seal website, and decide for yourself:

www.metrommp.com

 

[odcics2]

Good idea. I can see what might interchange - meaning long enough to trim down.
That would expand my search for the real thing!
THANKS!

 

[odcics2]

I've got a 68 Fury 4 door I haven sold much from. I can check it. I'll be out there in the yard this weekend. Remind me Friday to look if you haven't found anything

Here's a reminder.

 

[C Body Bob]

Here's a reminder.

LOL ok I'll try to get out there. We are have a sleet/rain storm here.

 

[C Body Bob]

I did get out there to the car. We've had a lot of weather & between the ice, pine straw, dirt & being wet I can't tell how good they are. I think I have a long set from a mid 70's New Yorker. I can look at those tomorrow if you like. I remember they where pretty long

 

[odcics2]

I did get out there to the car. We've had a lot of weather & between the ice, pine straw, dirt & being wet I can't tell how good they are. I think I have a long set from a mid 70's New Yorker. I can look at those tomorrow if you like. I remember they where pretty long

Don't put yourself out if the weather sucks!
Sure - when you can , check the New Yorker.
Need 26" long and no stainless bead running the length.
(guess I could have said all black!)
Much appreciated.

 

[C Body Bob]

Here's what I have

 

[Snotty]

Would a low line 69 to 73 Plymouth or Dodge C body 2 door piece work?

I don't know. Mine on my '70 ragtop are gone. However, they dd not have clips as the ones you've pictured do. They "slid" into a slot on the window trim. The trim is attached to the window via glue; again, no clips.

 

[odcics2]

View attachment 157858 View attachment 157859 View attachment 157860 Here's what I have

PM sent.

 

[C Body Bob]

Ok I have 2 more that might work. The red one is on a 64 Barracuda & the blue one is a wider soft felt from a 68 Monaco 4 door. If either or both will work let me know as it looks like I'll be in the yard all day Saturday pulling parts & I can get them then.

 

[odcics2]

On the blue one, do you have the outside one?
Interior parts are "fuzzy", exterior are the 'felt sweeps'.

 

[C Body Bob]

On the blue one, do you have the outside one?
Interior parts are "fuzzy", exterior are the 'felt sweeps'.

No that car is long gone

 

[odcics2]

ok.
Outside ones are what I need.
The 3 you sent are great, one more like that! (or 2 !)