Ball Joint Socket

[67-Fury]

Pardon me it seems this question gets asked a bit but what ball joint socket will fit a 67 fury? I see there is 1-15/16 1-59/64 2-1/8 2-9/64 I know the 2 9/64 is for vans and imperials hopefully my fellow C-body men can help

 

[65sporty]

I thought there was just two sockets? I will have to look and dig out mine and measure the inside

 

[65sporty]

Just looked PST offers one, Summit offers two. If you google it you can find it cheaper than Summit. I believe it's the smaller of the two

 

[67-Fury]

yea summit has 2 of them im thinking the small one should work I thought there were only two sizes also but I did some research and found this

60-72 A-body all, 73-76 A-body with drum brakes.
1-3/4" square ball joint socket.
Miller # C-3714 (may be discontinued)
Snap-On # S6302


57-79 B-body, 79-81 R-body, 76-80 F-body, 77-89 M-body, 80-83 J-body, 73-76
A-body with disc brakes, 70-74 E-body, 63-73 C-body.
1-15/16" square ball joint socket. (1.938")
Miller # C-3560
Moog # T412
Year One # MR48.
Blackhawk # 60460 (may be discontinued)


60-62 & 74-78 C-body, 59-75 D-body, 72-93 D-pickups, 70-94 B-vans, 87-94
Dakota.
2-1/8" square ball joint socket.
Miller # C-3561
Moog # T412
Year One # MR49

 

[68plymouth383]

Our cars use the b body ball joint socket. It's the larger one.

 

[67-Fury]

i cant really a 1-15/16 socket that is cheap enough but im thinking the 1-59/64 ball joint socket should work

 

[65 500]

http://www.etoolcart.com/suspension-and-steering.aspx

Miller and OTC are the good ones, the Sunex is probably Chinese.