GOLDMYN
Senior Member
Kroil, This product is GREAT, you'll never have to worry about a frozen bolt, buy on inter-
net
WD-40 was not made to be a rusty bolt/nut remover. It's a lubricant.Agree with the aeroKroil
Toss the WD-40 and never buy anymore.
And a piss poor one at that.WD-40 was not made to be a rusty bolt/nut remover. It's a lubricant.
PB Blaster is good and inexpensive, I still keep it around and it’s great for soaking things down the night before you disassemble. Kroil is THE best when you need it apart NOW!You guys ever use PB Blaster?
Whenever you use WD-40 ever notice how the propellant runs out and your stuck with 1/3 full can that you can't use?
I had a can of some factory Rotunda Ford spray that was the best in loosening bolts.
I will try aerokroil. You can't buy it in stores?
I thought all the truly smart guys use a 50/50 acetone/ATF penetrant.
Every bit as good and maybe better. Already in a convenient applicator.I get the impression this works better based on Matt’s endorsement above.
The acetone will dissolve plasticHmmm. I might just give the acetone and trans fluid a try and put it in a squirt bottle.
I was under impression this worked faster.