We had a good week, both headers in, 2 walls framed and one garage door installed.
New space will fit a couple of C-bodies
- Thread starter Zymurgy
- Start date
polara71
Old Man with a Hat
Look at you kicking ***... nice 
MickeyHerch
New Member
I have a 64 300 that would look GREAT in your garage!
Fratzog
Old Man with a Hat
Great progress. Keep posting!
65sporty
Old Man with a Hat
Looking good
Checking out the fit.
bluefury361
Old Man with a Hat
It's amazing how much smaller that space got with Goldie parked in it.
65sporty
Old Man with a Hat
I have always liked it but man that is just a good looking car
MickeyHerch
New Member
Wow....that car sure makes that garage look awesome!
300rag
It's Not Going to Shift Itself
Now, a nice 4-poster in there......
I was thinking the same thing when I took that first photo, look at all that room above Goldie. It will probably happen at some point, but not this year. I already have my choice narrowed down.
MickeyHerch
New Member
2 post lift, mig, tig , and stitch welder. Tire changer and blast cabinet. For starters.
Wow! You guys don't dick around. . . Do you?
Yer doing it again. . . Showoff! And you continue to really suck.
The big door was installed today. It was a big job for a couple of novices, can't say I would recommend doing it yourself.
The door weighs about 450lbs, compared to about 250 for the 10x10 door, but winding the springs is the big job. However we did it and it moves perfectly. Quite glad it is installed.
The door weighs about 450lbs, compared to about 250 for the 10x10 door, but winding the springs is the big job. However we did it and it moves perfectly. Quite glad it is installed.
More progress on the garage. Dividing wall in place, windows installed, all the electrical wiring installed.
Mike, are you going to put in insulation and a vapor barrier to keep the moisture out of there?
Yes all in one. I am going to have the expandable foam sprayed directly to the metal roof and in the walls too, including the other side of the dividing wall. Its going to be tighter than my house.
I left the framing an inch away from the block so I will have 4 1/2" on the exterior walls.
Yes all in one. I am going to have the expandable foam sprayed directly to the metal roof and in the walls too, including the other side of the dividing wall. Its going to be tighter than my house.
I left the framing an inch away from the block so I will have 4 1/2" on the exterior walls.
Yer gonna be able to heat that place with a lit cigarette. . .
polara71
Old Man with a Hat
Yes all in one. I am going to have the expandable foam sprayed directly to the metal roof and in the walls too, including the other side of the dividing wall. Its going to be tighter than my house.
I left the framing an inch away from the block so I will have 4 1/2" on the exterior walls.
Thank you, I had an immediate problem with the raw lumber against the block
Similar threads
