@stubs300 -- do you (or anyone you know) have experience with those two companies, Dr. Vinyl and Fibrenew ? The front seats on my Monaco had a couple of splits when I got the car, but the driver's have gotten worse since then. The rears are close to perfect.
Here are the front seats back in September 2018, in a photo posted by the seller. The photo shows that there is no issue with the base of the driver's seat, and no issue with the back of the passenger seat. The rips are on the base of the passenger side (one large, one small, both at the seams in the middle) and on the back of the driver's seat (two, one at the bottom of the seat back and the other about 1/4 up from the bottom):
Here is how they were back in February, when I bought the car (photo courtesy
@'69FuryIIIConvertible):
Here is the driver's seat in April, the base is still pretty much the same (no rips) as in February but the rips in the back seat have widened and foam has started to spill out:
As for now, the seat loo is how the seat is now, I thought I had a photo but I do not. In a nutshell, the bottom seems unchanged but the vinyl strip that broke on two sides 1/4 from the bottom is now permanently folded over, and foam is spilling out from there.
I could have the seats fully redone, but I was hoping to not have to swallow a large bill.