Latest activity

  • J
    Johnny Nine reacted to jollyjoker's post in the thread 1966 New Yorker heat control method? with
    Like
    Like
    .
    I got tired of the factory heater control valve leaking inside the firewall and into the carpet on my 65 Dodge . . . and the replacement...
  • halifaxhops
    Your kind of screwed replace it with a new one not used. Then sell the other one to lets say scrap yard $50-75
  • Dante64
    Dante64 replied to the thread Pulling in neutral.
    To address your last question. It’s a good one. There are no shops in driving distance that can handle this job correctly. I could have...
  • Lefty71
    "Clogged" in my experience is a buildup at the entire surface of the inlet end. There is no way that i know of the remove the...
  • Dante64
    Dante64 reacted to Big_John's post in the thread Pulling in neutral with
    Like
    Like
    .
    Having messed around with them just a little, I can tell you it doesn't surprise me if they need to be adjusted again. They can be...
  • Dante64
    Dante64 reacted to mgm1986's post in the thread Pulling in neutral with
    Like
    Like
    .
    That is exactly what I would do. If you find out the cause and could let us know here that would be hugely helpful. Good luck...
  • M
    mgm1986 reacted to CBODY67's post in the thread Pulling in neutral with
    Thanks!
    Thanks!
    .
    1968, unlike the earlier model in the picture, would be all metal rods and such. Still, adjustments to ensure the "shift comb" inside...
  • M
    mgm1986 reacted to Lefty71's post in the thread Pulling in neutral with
    Thanks!
    Thanks!
    .
    Pretty sure this can happen to any of them, regardless of the vintage. Ive seen it even in aftermarket and modified valve bodies.
  • Dante64
    Dante64 reacted to CBODY67's post in the thread Pulling in neutral with
    Like
    Like
    .
    1968, unlike the earlier model in the picture, would be all metal rods and such. Still, adjustments to ensure the "shift comb" inside...
  • Lefty71
    Lefty71 reacted to CBODY67's post in the thread Pulling in neutral with
    Agree
    Agree
    .
    1968, unlike the earlier model in the picture, would be all metal rods and such. Still, adjustments to ensure the "shift comb" inside...
  • Lefty71
    Lefty71 replied to the thread Pulling in neutral.
    Pretty sure this can happen to any of them, regardless of the vintage. Ive seen it even in aftermarket and modified valve bodies.
  • Torky
    Nice Track Sheet, but not from the red NY 4DS. VIN off by 20m date off by 1, Body 4DHT, not 4DSedan, white, but not red paint-etc...
  • Samplingman
    Samplingman reacted to OldWarHorse300's post in the thread I'm not a metal man but... with
    Thanks!
    Thanks!
    .
    Thank you! About paint, it's Finnish brand Tikkurila, and paint is Temadur 2k polyurethane paint, industrial grade with excellent...
  • X
    Xavi3r reacted to polara71's post in the thread Superlite with
    Like
    Like
    .
    There are a couple Of guys here that have them on a shelf. Glad it worked out for you.
  • polara71
    I know its not your car. If you were interested enough to reach out to the guy one would presume you may have asked about it. Thanks...
Back
Top