Wyatt’s Hot Rod build

Dana

Woodruff Carburetor Specialties
FCBO Vendor
Joined
Sep 17, 2011
Messages
446
Reaction score
745
Location
Ohio
Working with Wyatt to sneak some more CFM out of his AVS. He gave me the go ahead to carve on it. I’m gonna a little milling, blending, slabbing, smoothing, radiusing, thinning, and maybe a few more “ing” words to max out this thing. Here goes Wyatt it is disassembly day. Feel free to moderate pal.
587F6769-04E1-4C66-86C3-731330819419.jpeg
A6830088-2CD6-4D33-853F-7B7C10CCD10A.jpeg
image.jpg
 
Dumb question #1

Why wouldn’t you start with the bigger version of an AVS (440 magnum carb) if you are massaging more CFM out of this one?

not bashing just asking, I’ll be watching the progress.
 
I think because it is the right numbers.
 
Dumb question #1

Why wouldn’t you start with the bigger version of an AVS (440 magnum carb) if you are massaging more CFM out of this one?

not bashing just asking, I’ll be watching the progress.

Well. I already had this one...that's why.
 
Ok Wyatt, I had time to make a few chips today. Miller off the choke horn and roughed in the entry blend. And cleaned up some casting flash.
DDF24A92-F0A6-47A6-A6A7-C44E2241D0AA.jpeg
CA67247F-12C7-4304-9657-3C163D2C3615.jpeg
816F3267-F3D4-42B1-B6E4-C26E9EFD6465.jpeg
6092A9AF-B2BB-4B50-913C-A8435BEBC8A2.jpeg
 
This mountain of carbs behind me and only 24 hrs. In a day! Plus they opened the local 1/4 mile yesterday, that always brings in a rush of “hey man you got a couple accelerator pumps” and “ hey man I stripped out my squirted screws” . Not complaining at all, I love it. But the days do cruise right on by.
 
Last edited:
Back
Top