WANTED 318 Poly rockers with adjusting screws.

[Fast Eddie B]

i really just need a set of adjusting screws, but I’ll take the whole rocker assembly. Trying to get the motor ready so I can make Moparfest in August!

Time is of the essence!

 

[1970cat]

would any of these work?
Rocker Arm Adjusting Screws / Nuts

 

[Fast Eddie B]

I did find those. Thread pattern is right. Measurements appear to be correct. The only thing that concerns me is the existing or original screws are self locking. Must be the thread thickness as the spec calls for replacing them If they don’t have 3 inch pounds of torque. Leading me to believe the magic is in the thread not the rocker for keeping the setting. These have a locking nut, but that is only locking one way and only until it vibrates loose and wobles all over.

I’m going to ask the builder what he thinks. He even said he could probably find them. He found everything else to rebuild it. Just didn’t replace the rockers and this not the adjusters.

So I am covering all my bases right now!

 

[Fast Eddie B]

would any of these work?
Rocker Arm Adjusting Screws / Nuts

Builder said those are the replacement parts. Ordered a set from Summit. Installed this weekend. Got the intake back on. It is curing. See attached car **** for pre intake state.

Might be a couple weeks before i hear it run.