Scott 440 TNT
Member
Ok my 68 300 has power drum brakes, I replaced the MC and set out to bleed the rear lines.
I got almost nothing after pumping and nothing is coming through.
I'm thinking the proportioning valve has blocked the flow.
Usually there is some kind of way to reset the PV, any suggestions are appreciated.
FYI, I did bench bleed the MC and wheel cylinders are new with new rubber lines.
I got almost nothing after pumping and nothing is coming through.
I'm thinking the proportioning valve has blocked the flow.
Usually there is some kind of way to reset the PV, any suggestions are appreciated.
FYI, I did bench bleed the MC and wheel cylinders are new with new rubber lines.