Search results for query: *

Yes, so I just put in a NEW Ultima starter on the Newport (70). It cranked awesome the first two try’s, third sounded like pinion didn’t engage all the way & every try since then is just starter spinning. Suggestions?

Hi guys. Replacing the tail light bulbs, 3 of the 4 brake bulbs came out glass only. Having a heck of a time getting the metal backed out; which tool is best or another idea?

Hey guys. Last fall I put on a new master cylinder on the 70 Newport. It’d been converted to front disc brakes before I got the car, so I knew about the different sized resovoirs. Things have been fine until my last 2 drives; it’s only when I back into the garage that there’s a dragging problem...

Hello again. Refresher on vacuum advance? My car runs stronger with it disconnected, but I don’t want to hurt anything.

When bench bleeding my new one, I notice that the piston stroke is quite short, like a bit less than an inch; normal?

Hi guys. I overfilled last time I changed the oil by about a quart. Didn’t notice until yesterday that there’s some under the car. It’s off the road while I fix the brakes, but I still start it every week & let it idle/small revs. Is it bad (obviously) to run it with a quart over?

So I have to get a new one; no experience with brakes. Is it just a matter of unbolting, unscrewing lines & reversing the process? And where are the bleeding valves on the wheel? Thank you for any advice.

So I’ve always liked the look of raised white letter tires with the poverty caps; what do you guys think about the factory hubcap?

Hi guys. When I bought the Newport years ago it had already had a stroked RB put in. And a little while later I’d noticed that was driving it with the distributor dash pot unplugged. Previous owner had jammed a bit into a vacuum line going to ported side of Edel. carb. Car has always been a...

And go to C Body Cars & Fanatics.

Here in IL.! Flavor if the day: Royal Purple 20w50!

While my wife & I were at the MCACN last month, she stopped at a booth & got the info of how to have this secretly made for me; stainless steel plate! I love it!!!

I’m trying to upload a video so the audio comes through; haven’t figured it out yet. Just converted from Android to IOS.

Met a nice guy today at a local hardware store; hope he doesn’t mind me posting his car.

Well I saw only one C body; anybody see any other?

Hi guys, does anyone know if these nameplates on the rear bumper (70 Newport) just pop on & off, or are there fasteners behind.

Pulled a tick off of my stomach yesterday; anyone else see a familiar shape?

Finally got my TTI tips. But with my 2.25 pipes & the 2.5 slip on tips, is there a way to sleeve the difference with the provided clamp?

Finally found the exhaust tip turndowns I wanted; TTI has them for about $37. So it was 6:00 Central here in IL & l wanted to order them today. Mazzolini Racing in CA. answered my call & I talked to an older gentleman there and placed the order. Well we talked politics for a few minutes &...

Hey guys, where would I look for 2&1/4" exhaust tip turn downs?