SOLD Mopar BB Stage 6 heads

[oldkimmer]

Their just back from the machine shop. I had these checked for my own piece of mind. Ported by Muscle Motors, flow 320ish and 250ish. These have roller cam springs that were checked and are within spec. Comp 943 springs. They were milled some. 73.6 cc. Valve job done. Guides were good. New seals retainers and locks. Ready to bolt on and go. $2000.00 usd shipped and insured in Canada or the lower 48. U pay the pay pal fee or send me a moneygram. Thanks. Kim

 

[oldkimmer]

More pics

 

[Fury Man Van]

Are these still available and are the plugs straight or angled? My eyes are getting bad.

 

[oldkimmer]

Yes. Straight plug. Thanks for looking. Kim

 

[Fury Man Van]

They should work with the Factory HP Exaust Manifold?

 

[oldkimmer]

I believe so. The exhaust ports are raised 3/8s of an inch higher than factory. What motor do u have? Kim

 

[Fury Man Van]

68 383 4bbl

 

[Fury Man Van]

 

[oldkimmer]

Ok, u would need a 440 intake or intake spacers to run these on the 383. U can buy spacers on this site as they come up once in a while. I know who has a set. If your not running a solid roller cam the valve springs will need to be changed. I can get different springs. Kim