Over the last month I've been working on rebuilding my front suspension due to my lower control arm bushings being shot. I'm lucky enough to have a known low mileage car so everything was factory original and in relatively good shape. I was able to determine 90% of what things looked like as new and where markings went, so I though I would share with you guys. Maybe someone can use what I found and did as a reference should they choose to. I took a lot of pictures for reference purposes, but not really any for display as posting this was an after thought. Also, before someone blast me, I did not do much with the stub frame. I had to draw a line somewhere and I figure since I will have to paint the car in a few years (super thin in places) I would just pull it and detail all of that at that time. Besides, It's only me and you guys looking who will ever see this stuff.
Before and after lower control arms which appeared to have been left bare, with a white paint mark facing forward. I cleaned and clear coated them.
Before and after lower control arms which appeared to have been left bare, with a white paint mark facing forward. I cleaned and clear coated them.