WANTED Left Front Wheel Molding, '68 Dodge Polara,2932197, 2786791 (in Crash book)

[HWYCRZR]

This is one of my last remaining parts for my 1968 Dodge Polara that I have not seemed to find over the last 10 years. This part is only for the Dodge Polara, but was used in all '68 Polara DL body styles (Monaco, and 500 are different).
My other three wheel moldings are NOS, so prefer NOS for this as well.
Please PM me if you have a stash or know where I can find one. Parts Voice comes up with Brad's Mopar, but he doesn't have one.

Thank you
Marty

 

[marty mopar]

2932197 ran it on 2 locators PV and rearcounter.com Brad showed it as you know

and on Google and ZERO hits........... only your post above showed up!!!!!!!!!!!!!!!

that is going to be a MF to find!

 

[HWYCRZR]

I took my original LF wheel well trim to a local trim shop. He will actually do some aluminum aluminum work. He says he could squeeze it in and be done with it later next week. Around $100. My next challenge will be to match the buffed finish to look like the other anodized wheel well trim.
I am thinking that the Eastwood satin clear for bare metal may get it close to dull it down.
Also maybe dulling down the buff with 1600 grit or lite scotch brute pad could work as well. Some experimental work is in my future.