seat ID help

[Tubby]

can anyone tell what this seat is out of it was in the car (68 polara conv. ) when I bought it and I like the looks. The mounting is 11x47 1/2 split bench w/armrest. The release button the fold forward is on the side toward the upper part of seat also has the cardboard backs. I can't find any numbers that mean anything. Are b-body and c-body the same mounting distances?

 

[CBODY67]

Possible early 1970s B-body?

 

[MrMoparCHP]

1968 is way too early for high back bucket seats
Looks like the 1971 Polara

Alan

 

[69monaco]

71 polara is correct.

 

[Tubby]

Are b-body and c-body seat mounting the same? I think you are right with the 71 polara brougham m4 code looks good but is missing the button to flip seat back ahead like the m6 code maybe it will in the 2 door model










/

 

[CBODY67]

On 4drs, the seat backs were fixed. On 2drs, they had the button to flip the seat back forward for access to the rear seat.

 

[1970FuryConv]

Are b-body and c-body seat mounting the same? I think you are right with the 71 polara brougham m4 code looks good but is missing the button to flip seat back ahead like the m6 code maybe it will in the 2 door model










/

B-body and c-body are not the same. B-body is more narrow.
Since you have fold forward seats, I'd say 1971 Dodge C-Body 2-door.

 

[Tubby]

thanks for the help guys I think you nailed it

 

[1970FuryConv]

thanks for the help guys I think you nailed it

Maybe an interior guy can fabricate a patch panel for the driver side upper. I bet, even with sewn seams, it will look OK. Good luck, Tubby!