Search results for query: *

I need an alternator my 300, cant seem to find one that only has 1 field wire and batt post. They either dont have double pulley or they have internal regulator. Ive ckd the usual places, Rockauto shows to have one that might work, dont know if I trust them. I dont really want to upgrade...

Hello again old school c-bodies gurus, i was fixen to wash inder hood of my 300 and get to install carb. I came across these on the firewall above the blower motor. It gets voltage from the starter relay by the washer jug. A red wire was jammed between firewall and right one. One wire goes to...

Hey gents, im still working on getting dash back together on my 68 300, im having trouble finding the voltage limit for fuel gauge. Has anyone tried these solid state ones?, do they do the job?, dependable and which one should i use? Part #. Any info, Thanks.

Got brave, or stupid and tore dash apart on my 68 300. These are pics of the back of my wiper switch. I dont know if this is a resistor with the 2 black wires going through it or what, but looks like its burning and believe thats why my wipers keep stopping. Anybody else had this problem.

Can someone tell me if there is some sort of circuit breaker or overload on the wiper switch. Still getting wiring figured out under dash. Got it to work, seems like all 3 speeds work, but the arms wont go back to start position when off. Tried a couple times and then a small pop sound coming...

I am back again, and stuck. I have replaced old harness with correct evans update. 1968 300 with 1970 solid state v.r, electronic ign. Replaced starter relay, igniton kit came with distributor, module, 12v coil and resistor. Replaced plugs and wires. Has new ign switch and updated alt. I believe...

I got this harness from evans. 1968 with electronic ign and s.s vr upgrade. I am not sure which ones go on resistor. I think left side of resistor is right. not sure about blue/brown or the blue/blue tracer. I got the color large wiring diagram, doesnt show the 2 blues. Got the harness from...

I got a updated harness from Bill Evans for the 68 300. Got most figured out but I have a long brown wire with an eyelet term on the end. The other end goes to Starter relay. This brown wire is long enough to go around to the alternator side. I also got the blind mans version of colored...

I got my new engine compartment harness for my 300. Is there any kind of grease or protectant that i should apply to the bulkhead connection when i install the new plugend assembly?

Does anyone know of a company that makes wiring harness reproductions that are upgraded for electronic ignition and solid state voltage regulator, for my 68? Was looking at allpar and said there was but did not say who. Ive unwrapped my harness to trace mine and i found splices in several places.

Has anyone have any history on the mancini racing electronic conversion kits for 440? Mine went out again, going to start from scratch and wire myself.

I want to change plug wires and plugs on my 300. It has 2 different type wires but both are 7mm. I want to upgrade, has already been converted to electronic with orange ECU. What is best wires and plugs for my motor? Ive been looking at Taylor or Accel from summit. not sure about wire...

I need some help, my 300 just shut off yesterday. Restarted for about 15 secs and died again. Seemed to want to start after i released the key, but off again. Checked for spark out of coil, weak, yellow or none. Took out the ign switch and found someone has soldered a bridge between ign1 and...