WANTED Intake + Tires

[Corbin]

This is going to be a somewhat convoluted post: apologies in advance.

Looking for a factory 4bbl carb/manifold combination for a 361/383 B block. Prefer a complete take off. Located in the Seattle Washington area.

Also.. 225/75R14 tires seem to be in short supply?!? Not quite like common sense, but no local place had them listed. Really just looking for a spare.

 

[CBODY67]

This is going to be a somewhat convoluted post: apologies in advance.

Looking for a factory 4bbl carb/manifold combination for a 360/383 B block. Prefer a complete take off. Located in the Seattle Washington area.

Also.. 225/75R14 tires seem to be in short supply?!? Not quite like common sense, but no local place had them listed. Really just looking for a spare.

P225/75R-14 tires have been decreasing in availability since the earlier 1980s. Might be some in the Hankook (possibly whitewalls) and Nexen brands.

If you are only needing a spare tire, then buy a NEW one rather than an old one. ANY tire of that size, used, will have been aged-out of usability LONG AGO. Only good for ornamental purposes and NOT for road driving.

The B engines were in 350, 361, 383, and 400 cid sizes. The "360" engine is an LA block engine.

FWIW,
CBODY67

 

[Corbin]

P225/75R-14 tires have been decreasing in availability since the earlier 1980s. Might be some in the Hankook (possibly whitewalls) and Nexen brands.

If you are only needing a spare tire, then buy a NEW one rather than an old one. ANY tire of that size, used, will have been aged-out of usability LONG AGO. Only good for ornamental purposes and NOT for road driving.

The B engines were in 350, 361, 383, and 400 cid sizes. The "360" engine is an LA block engine.

FWIW,
CBODY67

Thanks for the correction regarding displacement. I am indeed looking for a 361 intake/carb. The motor is in a '64 880.

 

[Corbin]

I believe the p/n for an 'early' 4bbl intake is 2205968. The part number for a 'later' 4bbl intake is 2806301.

Regarding tires: Hankook, Nexan, and Cooper no longer manufacture tires in 225/75R-14. I would prefer new, and just may end up using 215/75R-14

 

[tallzag]

Corbin - your inbox is full

Have a carb and intake, located in Olympia. Assuming you’re going from a 2 bbl to a 4 bbl?

 

[cudamark]

Corbin - your inbox is full

Have a carb and intake, located in Olympia. Assuming you’re going from a 2 bbl to a 4 bbl?

If so. he'll need 4bbl kickdown linkage as well....or at least he'll have to modify his 2bbl linkage to work properly.

 

[thrashingcows]

I just bought a set of 225/70/14's for my Coronet...Cooper Cobra Radial GT's with raised white lettering.