Struck Gold

[71FuryGC]

So today my 71 Fury odometer turned over to 88,000. While I can't be sure, I believe it to be correct based on the wear of items like the steering wheel, brake pedal etc. This afternoon I decided to remove the rear seat to look for the broadcast sheet. It was attached to the seat frame with hog rings. I hadn't expected that as I had previously looked between the seat frame and burlap backing without success.@cuda hunter @ayilar. I'll post a clear picture once I have it straightened out. Any ideas on "Axle 51 and Axle 083"?

 

[70 Sport Suburban]

If the sheet says D51 in the axle section it's a 2.76 open

 

[71FuryGC]

If the sheet says D51 in the axle section it's a 2.76 open

Thanks for the info. I'm trying to find 083 which appears on line 4. 8 1/4 ring gear perhaps? It is a "tin back" but I don't know if it's 8 3/4.

 

[1970FuryConv]

Thanks for the info. I'm trying to find 083. 8 1/4 ring gear perhaps? It is a "tin back" but I don't know if it's 8 3/4.

Congrats!
If the pan is on the back of the axle, it is not an 8 3/4. 8 3/4 does not have a pan.

 

[71FuryGC]

This did detach from the rear seat in one piece but was pretty grungy as expected. I carefully brushed off the grime, pressed it for days under a stack of Mopar Parts catalogs then ironed it with a clothes iron on warm. Mostly quite legible.
@ayilar @69CoronetRT @70 Sport Suburban @1970FuryConv

 

[1970FuryConv]

This did detach from the rear seat in one piece but was pretty grungy as expected. I carefully brushed off the grime, pressed it for days under a stack of Mopar Parts catalogs then ironed it with a clothes iron on warm. Mostly quite legible.
@ayilar @69CoronetRT @70 Sport Suburban @1970FuryConv

View attachment 567322

You struck gold in finding that Build Sheet. Score! Winner!

 

[cuda hunter]

Wow! I've never seen one hog tied to the seat. That is different.
Great find!